Back to Membranes

Traspir Evo UV 210

External Membrane for Wall or Roof. Can be used for partially open facades. Water/airtight and highly vapour permeable. Resistant to UV rays.

Monolithic acrylic mix film, applied to polyester (PL) reinforcing layer.


High water-tightness and excellent resistance thanks to special extruded mix.

LCA - Life Cycle Assessment

Sustainability study of all aspects related to the production, use and disposal of the product in accordance with EN ISO 140 44.

EPD - Environmental Product Declaration

Type III environmental declaration on the environmental impact in accordance with EN ISO 14025

AUS/NZ 4200.1 Class 4

Classified as a Class 4 vapour permeable membrane.

Reaction to Fire

American classification tests to ASTM E84 measures a material’s reaction after being exposed to fire, in terms of flame spread and smoke density. Class1/A indicates best category pass.

Reaction to Fire

European classification according to EN 13501-1 indicating degree of combustibility, smoke density and dripping potential. The low values indicate low combustibility/self-extinguishing, no smoke, and no dripping potential.

Partially open Facades.
PERMANENT UV STABILITY. Infinite resistance to UV rays with exposure with opens joints up to 50mm wide, and with up to 40% of the surface uncovered. Can be used on partially open facades.

Where can it be applied?

For use on external wall and roof

Codes and Dimensions

CodeEx codeDescriptionTapeH&L(m)A(m2)
TTTUV210D42454TRASPIR EVO UV 210TTTT1.5 x 5075

Technical Specifications

Mass per unit areaEN 1849-2210g/m2
ThicknessEN 1849-20.3mm
StraightnessEN 1848-2Conforming
Water vapour transmission (Sd)EN 1931/EN ISO 125720.04m
Maximum tensile fore MD/CDEN 12311-1300 / 200 N/50 mm
Elongation MD/MCEN 12311-125/25%
Resistance to tearing MD/MCEN 12310-1120 / 120 N
Water-tightnessEN 1928Class W1
UV stability with joints up to 50mm wide with up to 40% of the facade uncovered.EN 13859-1permanent
UV resistance without final claddingEN 13859-14 months
Temperature resistance--40/+100˚c
Reaction to fireEN 13501-1Class B-s1, d0
Resistance to penetration of airEN 12114<0.02m3/m2h50Pa
After ageing:--
• maximum tensile force MD/CDEN 13859-1290/190 N/50mm
• water-tightnessEN 13859-1Class W1
• elongation MD/CDEN 13859-120/20%
Flexibillity at low temperatureEN 1109-40˚c
Dimensional stabilityEN 1107-2<1%
Thermal conductivity (λ)-0.3 W/mK
Specific heat-1800 J/kgK
Density-approx. 600 kg/m3
Water vapour resistance factor (μ)-approx. 130
VOC emissions-0 % (class A+)