Back to Membranes

Traspir Evo 160


High water tightness & air tightness but vapour permeable giving excellent weather resistance thanks to the structural continuity of the monolithic membrane.

LCA - Life Cycle Assessment

Sustainability study of all aspects related to the production, use and disposal of the product in accordance with EN ISO 140 44.

EPD - Environmental Product Declaration

Type III environmental declaration on the environmental impact in accordance with EN ISO 14025

AUS /NZS 4200.1 Class 4

Classified as a Class 4 vapour permeable membrane.

Reaction to Fire

European classification according to EN 13501-1 indicating degree of combustibility, smoke density and dripping potential. The low values indicate low combustibility, no smoke, and low dripping potential.

Reaction to Fire

AUS/NZS test to determine flammability. The low flammability index value indicates very low flammability of the material.

Codes and Dimensions

Codeex codeDescriptionTapeH&L (m)A (m2)
TTTEVO160D42504TRAPIR EVO 160 TTTT1.5 X 50 75

Technical Specifications

Mass per unit areaEN 1849-2160 g/m2
ThicknessEN 1849-20.5 mm
StraightnessEN 1848-2conforming
Water vapour transmission (Sd)EN 1931/EN ISO 125720.1m
Maximum tensile fore MD/CDEN 12311-1280 / 220 N/50mm
Elongation MD/MCEN 12311-150 / 60%
Resistance to tearing MD/MCEN 12310-1180 / 200 N
Water-tightnessEN 1928Class W1
UV resistanceEN 13859-14 months
Temperature resistance--40/+100˚c
Reaction to fireEN 13501-1class E
Resistance to penetration of airEN 12114< 0.o2m3/m2h50Pa
After ageing:--
• maximum tensile force MD/CDEN 13859-1260 / 200 N/50 mm
• water-tightnessEN 13859-1Class W1
• elongation MD/CDEN 13859-140 / 50%
Flexibillity at low temperatureEN 1109-40C
Dimensional stabilityEN 1107-2<2%
Thermal conductivity (λ)-0.4 W/mK
Specific heat-1800 J/kgK
Density-approx. 370 kg/m3
Water vapour resistance factor (μ)-approx. 160
Recommended installation pitch->13 degrees
Driving rain testTU Berlinpassed
VOC emissions-0 % (class A+)
Joint strengthEN 12317-2>200 N/50 mm